Call us at 1-800-742-7246 or email to info@pumprental.com

Welcome to pumprental.com

All Rain for Rent pumps have an end suction centrifugal pump with a fully automatic priming system incorporated into the design. This enables the pump to self-prime from completely dry conditions, even with extended suction lines. Liquid is not required to prime the pump, and therefore, in temporary dry conditions, the pump will 'snore' until such time as liquid is available. To see some of our innovative solutions, visit our Solution Successes on the web.

Standard Duty Pumps                  

Rain for Rent's Power Prime™ Standard Duty pumps are the workhorse of the rental fleet and range in size from 3" to 12" and provide 625 GPM to 6,900 GPM flows. These pumps are end suction centrifugal pumps with a fully automatic priming system built into the design. This enables the pump to self-prime from completely dry conditions, even with extended suction lines. With a pneumatic ejector mounted above the air/water separation tank, suction lifts up to 28ft. (8.5m) can be achieved.

The pumps can handle raw unscreened sewage, trade effluents,
thick slurries and solids from 1.5” (38mm) to 3.5" (90mm) in diameter.

High Head Pumps                         

Rain for Rent's Power Prime™ High Head pumps are end suction centrifugal pumps with a fully automatic priming system built into the design. This enables the pump to self-prime from completely dry conditions, even with extended suction lines. With a pneumatic ejector mounted above the air/water separation tank, suction lifts up to 28ft. (8.5m) can be achieved.

The pumps can handle raw unscreened sewage, trade effluents, thick slurries and solids from 1.0” (35mm) to 2" (55mm) in diameter.
 

Electric Pumps                                

Rain for Rent's Power Prime™ Standard Duty pumps can be fitted with diesel or electric engines and  range in size from 3" to 12" and provide 680 GPM to 5,000 GPM flows.  These pumps are end suction centrifugal pumps with a fully automatic priming system built into the design. This enables the pump to self-prime from completely dry conditions, even with extended suction lines. With a pneumatic ejector mounted above the air/water separation tank, suction lifts up to 28ft. (8.5m) can be achieved.

The pumps can handle raw unscreened sewage, trade effluents,
thick slurries and solids from 1.5” (38mm) to 3.5" (90mm) in diameter. 
 

Sound Attenuated Pumps      

Rain for Rent's Sound Attenuated Standard Duty pumps boast quiet operation with noise levels as low as 72 dB(A) at 7m (23ft)  and range in size from 4" to 12" and provide 800 GPM to 5,000 GPM flows. These pumps are end suction centrifugal pumps with a fully automatic priming system built into the design. This enables the pump to self-prime from completely dry conditions, even with extended suction lines. With a pneumatic ejector mounted above the air/water separation tank, suction lifts up to 28ft. (8.5m) can be achieved.

The pumps can handle raw unscreened sewage, trade effluents,
thick slurries and solids from 1.5” (38mm) to 3.5" (90mm) in diameter.

Submersible & Others               

Rain for Rent's submersible pump is a hydraulically driven submersible single stage end suction pump designed to handle unscreened sewage, trade effluents, thick slurries and solids. The submerged trash pump is close coupled to the hydraulic drive pump. Fluid motive power is provided from the hydraulic drive system which is powered by a sound attenuated diesel engine or an electric motor.

The Flygt line comes in various electrical configurations, has run dry capability and comes in a wide selection of sizes. The Hydra-Tech line comes in various diesel configurations, have variable speed, oil lubricated seals, run dry capability and have safe hydraulic drive for use where electric power is hazardous or impractical. Air Diaphragm pumps come in  2" and 3" units with heavy-duty construction of aluminum, stainless steel, and polypropylene with a wide selection of elastomers.

« Back to Top »